HRFW-310 T5

 

HRFW-310 T5

310 kVA Generator set Rental

Powered by: FPT_IVECO
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel |

 

 

Engine
  • Engine Specifications 1.500 r.p.m.
  • Rated Engine Output: 212,3kW cop ; 273,3kW prp ; 297,3kW standby
  • Manufacturer: FPT_IVECO
  • Model: C87TE4
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6-L
  • Bore and Stroke: 117 x 135 mm
  • Displacement: 8,7 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: API CI-4, ACEA E4, E5, E6 or E7
  • Compression Ratio: 15,9:1
  • Fuel Consumption ESP: 72,4 l/h
  • Fuel Consumption 100% PRP: 66,6 l/h
  • Fuel Consumption 80 % PRP: 52,6 l/h
  • Fuel Consumption 50 % PRP: 37,3 l/h
  • Lube oil consumption with full load: 0,2 % of fuel consumption
  • Total oil capacity including tubes, filters 28 L
  • Total coolant capacity: 58 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Diesel engine
  • Water-cooled
  • 24V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
Alternator
  • Generator: STAMFORD
  • Model: S4L1D.D41
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
Version
  • - SOUNDPROOFED VERSION.
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • High capacity fuel tank, with contention base and easy external filling
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
  • Fuel transfer pump (Optional)
Installation
  • - ELECTRICAL SYSTEM.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 488 ºC
  • Exhaust Gas Flow: 0,39 kg/s
  • Maximum allowed back pressure: 5 kPa
  • Exhaust Flange Size (external diameter): 140 mm
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 1085 m3/h
  • Cooling Air Flow: 5,65 m3/s
  • Alternator fan air flow: 0,83 m3/s
  • - STARTING SYSTEM.
  • Starting power: 4,5 kW
  • Starting power: 6,12 CV
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 999 L
Dimensions
  • - DIMENSIONS.
  • Length: 3.900 mm
  • Height: 2.649 mm
  • Width: 1.450 mm
  • Maximum shipping volume: 14,98 m3
  • Weight with liquids in radiator and sump: 4.503 kg
  • Fuel tank capacity: 999 L
  • Autonomy: 19 Hours
  • Sound pressure level: 68 ± 2,4 dB(A)@7m

Power

kVA

310
 
340
Prime power  (60 - 598)
Stand by  (63 - 657)

kW

248
 
272
Prime power  (48 - 478)
Stand by  (50 - 525)
 

Sound level

 dB
 Distance (m)
 
 

dimensions

 
dimensions
Long (A)
390
Width (B)
145
High (C)
264,90
 

Weight

 
Weight
Weight with liquid in radiator and carter
4.503
 

Fuel capacity

 
 
999
 
Back