HRFW-160 T5 S+

 

HRFW-160 T5 S+

153 kVA Generator set Silent Plus

Powered by: FPT_IVECO
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel | Stage 3A

 

 

Engine
  • Engine Specifications 1.500 r.p.m.
  • Rated Engine Output: 105,6kW cop ; 132,6kW prp ; 146,6kW standby
  • Manufacturer: FPT_IVECO
  • Model: N67.TE1PV
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct, common rail
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6-L
  • Bore and Stroke: 104 x 132 mm
  • Displacement: 6,7 L
  • Cooling System: Coolant
  • Lube Oil Specifications: S10 W40
  • Compression Ratio: 16,5:1
  • Fuel Consumption ESP: 37 l/h
  • Fuel Consumption 100% PRP: 33,6 l/h
  • Fuel Consumption 80 % PRP: 27,8 l/h
  • Fuel Consumption 50 % PRP: 24,1 l/h
  • Fuel Consumption 25 % PRP: 11,7 l/h
  • Lube oil consumption with full load: 0,3 % of fuel consumption
  • Total oil capacity including tubes, filters 17 L
  • Total coolant capacity: 36,2 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 12V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
Alternator
  • Generator: STAMFORD
  • Model: UCI274F
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-3 11"1/2
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
Version
  • - SOUNDPROOFED VERSION.
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
  • Fuel transfer pump (Optional)
Installation
  • - ELECTRICAL SYSTEM.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum allowed back pressure: 0,02 kPa
  • Exhaust Flange Size (external diameter): 140 mm
  • - NECESSARY AMOUNT OF AIR.
  • Alternator fan air flow: 0,514 m3/s
  • - STARTING SYSTEM.
  • Auxiliary Voltage: 12 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 999 L
Dimensions
  • - DIMENSIONS.
  • Length: 3.900 mm
  • Height: 2.661 mm
  • Width: 1.450 mm
  • Maximum shipping volume: 15,05 m3
  • Weight with liquids in radiator and sump: 3.945 kg
  • Fuel tank capacity: 999 L
  • Autonomy: 36 Hours
  • Sound pressure level: 59 ± 2,4 dB(A)@7m

Power

kVA

153
 
169
Prime power  (60 - 598)
Stand by  (63 - 657)

kW

122
 
135
Prime power  (48 - 478)
Stand by  (50 - 525)
 

Sound level

 dB
 Distance (m)
 
 

dimensions

 
dimensions
Long (A)
390
Width (B)
145
High (C)
266,10
 

Weight

 
Weight
Weight with liquid in radiator and carter
3.945
 

Fuel capacity

 
 
999
 
Back