HRFW-160 T5
153 kVA Generator set Rental
Powered by: FPT_IVECO
Alternator: STAMFORD
Three phase | 50 Hz | Diesel | Stage 3A
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 105,6kW cop ; 132,6kW prp ; 146,6kW standby
- Manufacturer: FPT_IVECO
- Model: N67.TE1PV
- Engine Type: 4-stroke diesel
- Injection Type: Direct, common rail
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 6,7 L
- Cooling System: Coolant
- Lube Oil Specifications: S10 W40
- Compression Ratio: 16,5:1
- Fuel Consumption ESP: 37 l/h
- Fuel Consumption 100% PRP: 33,6 l/h
- Fuel Consumption 80 % PRP: 27,8 l/h
- Fuel Consumption 50 % PRP: 24,1 l/h
- Fuel Consumption 25 % PRP: 11,7 l/h
- Lube oil consumption with full load: 0,3 % of fuel consumption
- Total oil capacity including tubes, filters 17 L
- Total coolant capacity: 36,2 L
- Governor Type Electrical
- Air Filter Type Dry
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 12V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: UCI274F
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-leakage chassis, predisposed to retain liquids (retention tray)
- Manhole for fuel tank cleaning and drainage
- Manhole for chassis cleaning
- Oversized chassis to protect the bodywork
- Slide carriage and brackets for transportation with forklift
- Tilting cap in the exhaust
- Manhole to fill the radiator
- Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- External filling of the fuel tank with safety key
- Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
- Mechanized for power cable output
- Door with window to visualize control panel, alarms and measurements
- Pressure locks
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Aditional silencer (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- M5 control panel with electronic CEM7 control unit and switched emergency stop
- Power panel with built-in circuit breaker plates
- Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
- Battery Switch
- M12 control panel with electronic DSE 7310 control unit and switched emergency stop
- Socket boxs IP67
- Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum allowed back pressure: 0,02 kPa
- Exhaust Flange Size (external diameter): 120 mm
- - NECESSARY AMOUNT OF AIR.
- Alternator fan air flow: 0,514 m3/s
- - STARTING SYSTEM.
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 450 L
- Other fuel tank capacities: 600, 1.100, 450 L
- - DIMENSIONS.
- Length: 3.360 mm
- Height: 1.997 mm
- Width: 1.250 mm
- Maximum shipping volume: 8,39 m3
- Weight with liquids in radiator and sump: 2.262 kg
- Fuel tank capacity: 450 L
- Autonomy: 16 Hours
- Sound pressure level: 68 ± 2,4 dB(A)@7m
Power
kVA
153
169
Prime power (35 - 626)
Stand by (60 - 690)
Stand by (60 - 690)
kW
122
135
Prime power (48 - 501)
Stand by (48 - 633)
Stand by (48 - 633)
Sound level
dB
Distance (m)
Distance (m)
dimensions
Long (A)
336
Width (B)
125
High (C)
199,70
Long (A)
132,28
Width (B)
49,21
High (C)
78,62
Weight
Weight with liquid in radiator and carter
2.262 4.987,71
2.262 4.987,71
Fuel capacity
450
118,80
dimensions
Long (A)
336
Width (B)
125
High (C)
199,70
Long (A)
132,28
Width (B)
49,21
High (C)
78,62
Weight
Weight with liquid in radiator and carter
2.302 5.075,91
2.302 5.075,91
Fuel capacity
450
118,80
dimensions
Long (A)
336
Width (B)
125
High (C)
199,70
Long (A)
132,28
Width (B)
49,21
High (C)
78,62
Weight
Weight with liquid in radiator and carter
2.353 5.188,37
2.353 5.188,37
Fuel capacity
600
158,40
dimensions
Long (A)
336
Width (B)
125
High (C)
221
Long (A)
132,28
Width (B)
49,21
High (C)
87,01
Weight
Weight with liquid in radiator and carter
2.516 5.547,78
2.516 5.547,78
Fuel capacity
1.100
290,40