HFW-250 T5

 

HFW-250 T5

250 kVA Generator set Soundproof

Powered by: FPT_IVECO
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel | Stage 3A

 

 

Engine
  • Engine Specifications 1.500 r.p.m.
  • Rated Engine Output: 0kW cop ; 228,3kW prp ; 254,3kW standby
  • Manufacturer: FPT_IVECO
  • Model: C87TE3F
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct, common rail
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6-L
  • Bore and Stroke: 117 x 135 mm
  • Displacement: 8,7 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 16,5:1
  • Fuel Consumption ESP: 67,4 l/h
  • Fuel Consumption 100% PRP: 59 l/h
  • Fuel Consumption 80 % PRP: 48 l/h
  • Fuel Consumption 50 % PRP: 35,7 l/h
  • Lube oil consumption with full load: 0,2 % of fuel consumption
  • Total oil capacity including tubes, filters 28 L
  • Total coolant capacity: 63 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
Alternator
  • Generator: STAMFORD
  • Model: UCDI274K
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
Version
  • - SOUNDPROOFED VERSION.
  • Steel chassis
  • Anti-vibration shock absorbers
  • Fuel tank
  • Fuel level gauge
  • External emergency stop switch
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Watertight chassis (acts as a double barrier against liquid retention)
  • Fuel tank drain plug
  • Chassis drain plug
  • Chassis ready for future mobile kit installation
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Versatility to assemble a high capacity chassis with a metallic fuel tank
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
  • Fuel transfer pump (Optional)
Installation
  • - ELECTRICAL SYSTEM.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 488 ºC
  • Maximum allowed back pressure: 5 kPa
  • Exhaust Flange Size (external diameter): 140 mm
  • Heat dissipated by exhaust pipe: 650 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 1025 m3/h
  • Cooling Air Flow: 5,1 m3/s
  • Alternator fan air flow: 0,58 m3/s
  • - STARTING SYSTEM.
  • Starting power: 5 kW
  • Starting power: 6,8 CV
  • Recommended battery: 120 x 2 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 449 L
  • Other fuel tank capacities: 999 L
Dimensions
  • - DIMENSIONS.
  • Length: 3.800 mm
  • Height: 2.253 mm
  • Width: 1.400 mm
  • Maximum shipping volume: 11,99 m3
  • Weight with liquids in radiator and sump: 3.531 kg
  • Fuel tank capacity: 449 L
  • Autonomy: 9 Hours
  • Sound pressure level: 70 ± 2,4 dB(A)@7m

Power

kVA

250
 
275
Prime power  (60 - 598)
Stand by  (63 - 657)

kW

200
 
220
Prime power  (48 - 478)
Stand by  (50 - 525)
 

Sound level

 dB
 Distance (m)
 
 

dimensions

 
dimensions
Long (A)
380
Width (B)
140
High (C)
225,30
 

Weight

 
Weight
Weight with liquid in radiator and carter
3.531
 

Fuel capacity

 
 
449
 

dimensions

 
dimensions
Long (A)
380
Width (B)
140
High (C)
261,50
 

Weight

 
Weight
Weight with liquid in radiator and carter
4.033
 

Fuel capacity

 
 
999
 
Back