HRFW-60 T5

 

HRFW-60 T5

60 kVA Generator set Rental

Powered by: FPT_IVECO
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel | Stage 3A

 

 

  • Engine Specifications 1.500 r.p.m.
  • Rated Engine Output: 43,2kW cop ; 54,5kW prp ; 60kW standby
  • Manufacturer: FPT_IVECO
  • Model: NEF45SM1F
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged
  • Number of cylinders and arrangement: 4-L
  • Bore and Stroke: 104 x 132 mm
  • Displacement: 4,5 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 17,5:1
  • Fuel Consumption ESP: 18 l/h
  • Fuel Consumption 100% PRP: 16,7 l/h
  • Fuel Consumption 80 % PRP: 13 l/h
  • Fuel Consumption 50 % PRP: 9,5 l/h
  • Lube oil consumption with full load: 0,1 % of fuel consumption
  • Total oil capacity including tubes, filters 12,8 L
  • Total coolant capacity: 18,5 L
  • Governor Type Mechanical
  • Air Filter Type Dry
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 12V electrical system
  • Dry air filter
  • Radiator with pusher fan
  • Mechanical governor
  • Hot parts protection
  • Moving parts protection
  • Radiator water level sensor (Optional)
  • HTW sender (Optional)
  • LOP sender (Optional)
  • Generator: STAMFORD
  • Model: UCI224E
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-3 11"1/2
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - SOUNDPROOFED VERSION.
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • Versatility to assemble a high capacity chassis with a metallic fuel tank
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
  • Aditional silencer (Optional)
  • Fuel transfer pump (Optional)
  • - ELECTRICAL SYSTEM.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • M12 control panel with electronic DSE 7310 control unit and switched emergency stop
  • Socket boxs IP67
  • Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Battery Switch (Optional)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 492 ºC
  • Exhaust Gas Flow: 0,0945 kg/s
  • Maximum allowed back pressure: 5 kPa
  • Exhaust Flange Size (external diameter): 90 mm
  • Heat dissipated by exhaust pipe: 493 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 289 m3/h
  • Cooling Air Flow: 2,2 m3/s
  • Alternator fan air flow: 0,216 m3/s
  • - STARTING SYSTEM.
  • Starting power: 3 kW
  • Starting power: 4,08 CV
  • Recommended battery: 100 Ah
  • Auxiliary Voltage: 12 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 240 L
  • Other fuel tank capacities: 390, 850, 240 L
  • - DIMENSIONS.
  • Length: 2.810 mm
  • Height: 1.782 mm
  • Width: 1.150 mm
  • Maximum shipping volume: 5,76 m3
  • Weight with liquids in radiator and sump: 1.624 kg
  • Fuel tank capacity: 240 L
  • Autonomy: 18 Hours
  • Sound pressure level: 69 ± 2,4 dB(A)@7m

Power


kVA

60
 
63
Prime power  (60 - 598)
Stand by  (63 - 657)

kW

48
 
50
Prime power  (48 - 478)
Stand by  (50 - 525)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
178,20
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.624
 

Fuel capacity


 
 
240
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
178,20
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.644
 

Fuel capacity


 
 
240
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
192,80
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.774
 

Fuel capacity


 
 
390
 

dimensions


 
dimensions
Long (A)
281
Width (B)
115
High (C)
220,10
 

Weight


 
Weight
Weight with liquid in radiator and carter

1.904
 

Fuel capacity


 
 
850