HRSW-355 T5
360 kVA Generator set Rental
Powered by: SCANIA
Alternator: STAMFORD
Three phase | 50 Hz | Diesel | Stage 3A
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 315kW prp
- Manufacturer: SCANIA
- Model: DC13-71A(02-01)
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 130 x 160 mm
- Displacement: 12,7 L
- Cooling System: Coolant
- Lube Oil Specifications: ACEA E3,E4,E5 or E7
- Compression Ratio: 17,3:1
- Fuel Consumption 100% PRP: 77,09 l/h
- Fuel Consumption 75 % PRP: 57,82 l/h
- Fuel Consumption 50 % PRP: 38,92 l/h
- Lube oil consumption with full load: 0,3
- Total oil capacity: 38 L
- Total coolant capacity: 39 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 90 mm
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Water separator filter (visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: S4L1D.E41
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-1 14"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-leakage chassis, predisposed to retain liquids (retention tray)
- High capacity fuel tank, with contention base and easy external filling
- Manhole for fuel tank cleaning and drainage
- Manhole for chassis cleaning
- Oversized chassis to protect the bodywork
- Slide carriage and brackets for transportation with forklift
- Tilting cap in the exhaust
- Manhole to fill the radiator
- Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- External filling of the fuel tank with safety key
- Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
- Mechanized for power cable output
- Door with window to visualize control panel, alarms and measurements
- Pressure locks
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Aditional silencer (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- M5 control panel with electronic CEM7 control unit and switched emergency stop
- Power panel with built-in circuit breaker plates
- Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
- Battery Switch
- M12 control panel with electronic DSE 7310 control unit and switched emergency stop
- Socket boxs IP67
- Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 476 ºC
- Exhaust Gas Flow: 0,467 kg/s
- Maximum allowed back pressure: 100 mbar
- Exhaust Flange Size (external diameter): 160 mm
- Heat dissipated by exhaust pipe: 614,34 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 1350 m3/h
- Cooling Air Flow: 9,58 m3/s
- Alternator fan air flow: 0,8 m3/s
- - STARTING SYSTEM.
- Starting power: 5,5 kW
- Starting power: 7,48 CV
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 2.000 L
- - DIMENSIONS.
- Length: 4.602 mm
- Height: 2.809 mm
- Width: 1.850 mm
- Maximum shipping volume: 23,91 m3
- Weight with liquids in radiator and sump: 4.783 kg
- Fuel tank capacity: 2.000 L
- Autonomy: 35 Hours
- Sound pressure level: 68 ± 2,4 dB(A)@7m
Power
kVA
360
400
Prime power (250 - 735)
Stand by (275 - 807)
Stand by (275 - 807)
kW
288
320
Prime power (200 - 588)
Stand by (220 - 646)
Stand by (220 - 646)
Sound level
dB
Distance (m)
Distance (m)
dimensions
Long (A)
460,20
Width (B)
185
High (C)
280,90
Long (A)
181,18
Width (B)
72,83
High (C)
110,59
Weight
Weight with liquid in radiator and carter
4.783 10.546,52
4.783 10.546,52
Fuel capacity
2.000
528